Pressure infiltration of boron nitride preforms with molten aluminum

The infiltration of compacted cubic BN (cBN) with molten aluminum has been investigated as a potential route for a cheap and easy method of manufacturing cBN/metal composites. CBN compacts have been infiltrated with molten Al at a temperature between 670 and 800 °C and pressure of 15 MPa in vacuum. At these temperatures no pronounced interactions between hexagonal and cubic BN with Al was observed, allowing the complete infiltration of cBN with 12 μm mean grain size. After infiltration at 800 °C, the temperature was increased without pressure to convert aluminum into borides and AlN. The hardness of the resulting materials depends on the content of hexagonal, cubic BN and the rate of conversion of Al into borides and AlN. The infiltration height of less than 1 mm obtained from infiltrating the 3 μm cBN powder green compacts gave a hardness of 22.0 ± 0.6 GPa after heat treatment.     

基于加载算法的室内无线信道OFDM接收机的性能

本文研究了无线局域网中使信号频谱得到优化的一种简单OFDM子载波加载算法。此算法基于边缘自适应（Margin Adaptive）加载准则及其在室内无线信道上的性能。     

A tolerant approach to reconstruct topology from unorganized trimmed surfaces

Presented in this paper is a topology reconstruction algorithm from a set of unorganized trimmed surfaces. Error-prone small geometric elements are handled to give proper topological information. It gives complete topology to topologically complete models, and it is also tolerant to incomplete models. The proposed algorithm is vertex-based in that clues for topological information are searched from the set of vertices first, not from that of edges.     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

多部件设备维修问题研究及遗传算法求解

合理组织设备维修，缩短设备维修时间是生产运营管理的一个重要环节。本文探讨了多部件设备维修的有效组织问题。考虑到维修工人对拆分后设备的不同部分具有不同的维修效率，提出了一种基于维修时间优化的决策方法，将其与经典指派方法进行了比较；进一步地，对这一NP-hard问题设计了遗传算法，通过数值例子讨论了其求解有效性。     

基于非锐化掩模的实时自适应图像增强算法

针对传统的非锐化掩模算法的局限性,依据图像中各像素点及以其为中心的若干相邻像素点的均方差值,提出了自适应图像增强算法的原理,并分析其硬件实现方法,然后给出了该算法与其它算法应用于图像增强的对比结果,最后在FPGA（field programmable gate array）实验板上进行验证.实验结果表明,此算法有效的增强图像的细节区域,防止图像边缘区域出现过冲现象,抑制图像平坦区域的噪声放大.因此,该算法取得了良好的视觉效果,硬件实现简单,适合于实时条件下图像的增强.     

Gold Medal Award for Life Achievement in the Application of Psychology: Edwin A. Fleishman.

The 2004 Gold Medal Award for Life Achievement in the Application of Psychology was awarded to Edwin A. Fleishman, for his significant contributions to the science and applications of psychology, which he has sustained over his remarkable career. He is cited for his research, which has had a profound influence on our understanding of human capabilities, their measurement, their development, and their application in the world of work. Through his many influential leadership roles, as president of the International Association of Applied Psychology and three divisions of the American Psychological Association, and as editor of the Journal of Applied Psychology, he has helped shape our profession. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Determination of the Coordinates of the Center of a Gaussian Beam by Means of a Matrix Photodetector Using a Weighting Method

A weighting algorithm to determine the coordinates of the center of a Gaussian laser beam projected onto a matrix photodetector is considered. The influence of the internal noise of the photodetector, the maximum brightness of the signal at the beam maximum, and the beam radius on the precision of the algorithm is investigated. Recommendations on image processing are presented.     

Adsorption of H2S or SO2 on an activated carbon cloth modified by ammonia treatment

The aim of this research is to investigate how ammonia treatment of the surface can influence the activity of a viscose-based activated carbon cloth (ACC) for the oxidative retention of H₂S and SO₂ in humid air at 25 °C. Surface basic nitrogen groups were introduced either by treatment with ammonia/air at 300 °C or with ammonia/steam at 800 °C. The pore structure of the samples so prepared was examined by adsorption measurements. Changes in the surface chemistry were assessed by X-ray photoelectron spectroscopy, X-ray absorption spectroscopy and temperature programmed desorption (TPD). The change of ACC activity could not be merely attributed to surface nitrogen groups but to other changes in the support. Ammonia/steam treatment improved ACC performance the most, not only by introducing nitrogen surface groups, but also by extending the microporosity and by modifying the distribution of surface oxygen groups. Successive adsorption-regeneration cycles showed important differences between oxidative retention of H₂S and SO₂ and the subsequent catalyst/support regeneration process.